How To See Of Ust Is Registered In Tn

Tennessee UST Class A B & C Operator Training

Tennessee Underground Storage Tank (UST) Form AB & C Certification

Country Requirements
Every bit required past the EPA, all UST operators must be trained by Oct thirteen, 2018. Afterwards this appointment, new Class A and B operators must be trained within 30 days of assuming duties. Class C operators must be trained before assuming duties.

Department 1524 of the Federal Energy Policy Act of 2005 required that the state of Tennessee declare amendments to the country underground storage tank rules to require each clandestine storage tank facility take Class A, Course B, and Class C operators. Class A or Class B operator candidates will demand to pass a written exam in lodge to be certified. The exam assures that hugger-mugger storage tank system operators possess the necessary knowledge regarding the proper operation of undercover storage tank systems. A test is not required for the Class C operator, but those persons must be properly trained.

Constructive August 8, 2012, every Tennessee facility having one or more petroleum UST systems subject to the requirements of Tennessee Petroleum Hush-hush Storage Tanks – Rule 0400-18-01 (PDF) must accept had i or more persons who have been designated by the tank owner as Grade A, Class B, and Grade C Operator(southward).

Class A operators are ultimately responsible for ensuring compliance with UST regulatory requirements. This will include:

Having a general knowledge of spill prevention, overfill prevention, release detection, corrosion protection, emergency response, release and suspected release reporting, product compatibility, documentation requirements for financial responsibility, notification requirements, and temporary/permanent closure requirements.
Managing resources and personnel.
Establishing piece of work assignments.
Existence able to brand informed decisions.

Grade B operators are responsible for the solar day to day aspects of operating, maintaining, tape keeping, and informing the proper persons when repairs or maintenance is needed. Typically they monitor, maintain, and ensure:

Release detection method, record keeping, and reporting requirements are met.
Release prevention equipment, record keeping, and reporting requirements are met.
All relevant equipment complies with operation standards.
Appropriate individuals are trained to properly respond to emergencies caused by releases or spills from cloak-and-dagger storage tank systems at the facility.

Course C operators are responsible for appropriate safety procedures to follow if the following occur:

Alarms go off on UST monitoring equipment.
A Dispenser is damaged and at that place is the possibility of a leak.
A commitment driver has a spill or overfill.
A visible release occurs or you notice signs that a release might accept occurred.
Leak detection equipment shuts downwards or slows downward pumps.
In example of an emergency you should be trained to shut off product flow.

Persons to exist classified as Class A, Class B, or Class C Operators must consummate a preparation plan and obtaining a passing score on a UST operator training program examination. Class C Operator training may be provided by the tank possessor, a trained Form A or Class B Operator in accordance with guidance published by the partition, or by successful completion of Class C Operator preparation using the division's spider web-based operator training program. Class C Operators must exist trained before assuming responsibility for responding to emergencies.

Tennessee was granted state plan approval (SPA) in 1998.

Retraining Requirements
If an underground storage tank system is out of compliance, the class A or form B operator, or both, must exist retrained. Every bit a result of the retraining of Class A operators or Class B operators, subsequent re-grooming of the Class C operators shall as well occur. Voluntary refresher preparation is encouraged to ensure operator is upward-to-date with electric current regulations and procedures.

Reference: Tennessee Petroleum Hugger-mugger Storage Tanks – Dominion 0400-eighteen-01-.16 Certified Operator Program (PDF)

UST Course Data

UST Form A/B Grade Description
The UST Class A/B operator training course is presented in capacity. Each chapter utilizes multimedia to enrich the learning feel. Each chapter is followed by a quiz. If the pupil answers a quiz question incorrectly, the quiz feedback redirects the pupil to the correct course information.

In improver to the quizzes, the UST Class A/B operator training course includes a final exam of 100 questions, 80% of which must be answered correctly in club to print a document.

There is not whatsoever time brake to access the grade, so students can complete the entire course in a single session (approximately 4 hours plus exam fourth dimension) or have the course in segments.

UST Grade C Grade Description
The UST Class C operator training class consists of seven chapters. Each affiliate is followed by a brusk quiz. Once a student has completed all capacity and quizzes, the learner will be directed to print out a form checklist.

The course is instructed through a student orientation bout of a mock facility, where a managing director (or Class B Operator) will identify and explain each topic and then marker them off a checklist when completed. When the checklist has been completed, the student can so impress the UST Class C operator certificate.

There is not any fourth dimension brake to access the course, and then students may take as much time equally needed to consummate their training

UST Operator A/B Course Outline
The following topics are covered in the UST A/B Operator course:

Affiliate i: Operator Overview
This chapter describes the primary responsibilities of the Class A, Class B, and Class C operator. Information technology likewise includes the grooming requirements for each form of operator.
Chapter 2: System and Components
This affiliate seeks to raise ecology awareness as well equally conspicuously communicate a key comprehension of UST systems. Components covered include secondary containment, emergency close-off valves, vapor recovery, tank materials, and piping materials. A download of UST terminology is available here.
Chapter 3: Release Detection
This chapter emphasizes release detection methods. Equipment testing, the analysis of test results, as well as monitoring of the UST system are addressed in this chapter. Release detection methods covered include automatic tank gauging (ATG), inventory command, secondary containment with interstitial monitoring, statistical inventory reconciliation (SIR), manual tank gauging, vacuum monitoring, soil vapor monitoring, groundwater monitoring, and tank tightness testing. Release detection methods for piping, such every bit electronic and manual line leak detectors, are also discussed.
Chapter 4: Release Prevention
This chapter prompts the trainee to exist proactive in preventing spills and releases. It covers the system components that are designed to prevent corrosion, spills, and overfills. These include spill buckets and sumps equally well every bit sacrificial anode and impressed current cathodic systems, overfill protection valves, overfill alarms, and ball bladder valves. Secondary containment also as alarms and warnings are covered in this chapter. An EPA Correct Filling Checklist is available for download.
Chapter v: Planning and Response
The focus of this chapter is preparation for a release and initial response actions. Topics include recognizing alert signs of a leak, maintaining spill kits, knowing the location of the Emergency Finish button, and posting emergency contact data. Critical attending is given to clean-upward and release reporting requirements, including sensitive receptor protection and country notification requirements.
Chapter 6: Fiscal Responsibility/Financial Documents
Owners and operators of petroleum USTs must demonstrate financial responsibility for bodily injury and belongings damage caused by spill and releases. This chapter covers fiscal responsibility statutes and fiscal assurance mechanisms as well as recordkeeping and reporting requirements.
Chapter vii: Registration and Installation
This chapter discusses required documentation and reporting. Topics include tank permits, registration and administrative documents, and UST installation requirements.
Chapter viii: Inspection and Closure
UST testing and inspection requirements are covered in this affiliate. Commitment prohibition and temporary and permanent tank closures are also addressed.

UST Operator Class C Course Outline
The following topics are covered in the UST A/B Operator course:

Chapter i: Facility Overview
This chapter provides a bones overview of the chief components of a typical UST facility. These components include the USTs, manways, spill buckets, fuel dispensers, and dispenser nozzles.
Affiliate 2: Monitoring
This chapter emphasizes the components used to monitor a UST facility. Students will larn what an Automated Tank Gauge (ATG) is and does, how to interpret its alarms and warnings, and what to do in case of an alert. The office of line leak detectors is also discussed.
Chapter 3: Ecology
In this affiliate, students larn about sensitive receptors, or places where a fuel spill may leave the facility and enter the environment. The chapter also introduces students to the spill kit and its contents, and how to use spill kit components to contain spills threatening sensitive receptors like curb breaks and drains.
Affiliate iv: Fueling Rules
The focus of this chapter is fuel delivery safety. Students will watch a short video on proper fueling procedures. Students as well acquire virtually hazards at the fueling signal, including smoking, static electricity, leaving a vehicle unattended while fueling, and leaving a vehicle running while fueling.
Chapter 5: Delivery Procedures
This affiliate teaches the student how to supervise a fuel delivery and monitor for issues during a fuel commitment. Additional emphasis is placed on the ATG and on overfill prevention devices like overfill prevention valves and ball float valves. Delivery prohibitions are too addressed.
Chapter 6: Prophylactic
This chapter covers safety data every Grade C Operator needs to respond to emergencies. Included hither is a video explaining when and how to use a fire extinguisher. The Emergency Stop and All Finish buttons are identified and discussed.
Chapter vii: Emergency Situations
This affiliate discusses mutual emergency situations and proper responses to them, including what to do if a vehicle leaves the facility with the nozzle still in the vehicle'due south fuel spout. Managing customer traffic in the outcome of a spill is besides covered. Correct burn extinguisher operation is reviewed.
Chapter 8: Final Checklist
Review and complete the checklist to complete your training

UST Course Completion Certificate
Print a copy of your completion certificate for your employer and records. Y'all may as well login and reprint your certificate at any time.

State Contacts

Tennessee was granted land plan approval (SPA) in 1998.

UST/LUST Program

Tennessee Department of Environs and Conservation
Partitioning of Underground Storage Tanks
William R. Snodgrass Tennessee Tower
312 Rosa L. Parks Avenue, twelfth Floor
Nashville, TN 37243

Phone: 615-532-0945
Fax: 615-532-9759

UST/LUST Programme: http://www.tn.gov/environment/secret-storage-tanks/

Fund Programme

Tennessee Department of Environment and Conservation
Underground Storage Tank Reimbursement Fund
William R. Snodgrass Tennessee Tower
312 Rosa 50. Parks Avenue, twelfth Floor
Nashville, TN 37243

Phone: 615-532-0972
Fax: 615-532-9759

Fund Program: http://www.land.tn.us/environment/underground-storage-tanks/tanks_fund-reimbursement.shtml

Federal Resources

EPA Booklet – Musts for USTS
http://www.epa.gov/oust/fedlaws/regs2015-musts.pdf

This booklet describes the 2015 revised federal UST regulation. Many states and territories (referred to as states in this booklet) have country plan approval from EPA. In these states, the state'southward UST regulation is used in lieu of the federal UST regulation. To find a listing of states with state program approval, see http://www.epa.gov/oust/states/spamap.htm.